Mast Bracket and GPS Poles

Radio Antenna Mast Bracket
#2133-03
The open clamp attachment allows quick and easy connection to the pole. Will connect to 19 mm and 32 mm diameter poles. The brass male 5/8 x 11 bolt is easily removed for direct attachment of the radio antenna to the bar. The bracket comes with one non-slip Velcro Cable strap (#8124-012) to help manage the radio cable. It can be used with the SECO Radio Antenna Adapter (#2133-00) which adapts 1-1/8 x 18 radio antennas to any 5/8 x 11 threaded tip.
$ 99.95

GPS POLES & ACCESSORIES
		Radio Antenna Mast Bracket #2133-03 The open clamp attachment allows quick and easy connection to the pole. Will connect to 19 mm and 32 mm diameter poles. The brass male 5/8 x 11 bolt is easily removed for direct attachment of the radio antenna to the bar. The bracket comes with one non-slip Velcro Cable strap (#8124-012) to help manage the radio cable. It can be used with the SECO Radio Antenna Adapter (#2133-00) which adapts 1-1/8 x 18 radio antennas to any 5/8 x 11 threaded tip. $ 99.95
		GPS /Radio Antenna Mast Bracket #2133-10 This bracket allows the user to assemble sections of standard diameter poles to obtain the desired height above ground of the GPS or radio antenna. It works with any standard 5/8 x 11 tripod and any pole sections 1” (25 mm) to 1.25” (32 mm) in diameter. It’s easily plumbed over the point when needed for elevating a GPS antenna over the point and through the canopy. Easy and controlled setups are achieved by lifting one section at a time up through the bracket. 6 to 7 meters height is stable when using 1.25” sections. For windy conditions or higher setups a plate for attaching guy wires can be used. $ 99.95
	Quick Release GPS Rover Rods #5125-01-YEL This pole is configured to allow the quick and safe release of your GPS antenna. There’s no more screwing the antenna on and off, risking the antenna being dropped and frustrating time lost. The quick release adapter stays attached to the GPS antenna. The quick release pin features an anti-rotation notch that prevents the antenna from rotating. Measures 2 meters. The pole has a 40-minute circular vial, vinyl hand grip and replaceable steel point. $ 129.95		GPS Rover Rod Carrying Case #8162-00-ORG $ 44.95	GPS Quick Release Adapters #5187-00 Female 5/8 x 11 with quick release tip Adds 23.8 mm to length of rod. $ 49.95
				GPS Quick - Disconnect Adapter #5111-00 Adds 76.22 mm to pole lenght. Use with #5187-00 $ 99.95
		1.4 - Meter carbon Fiber Prism Pole #5129-52 Dual Graduations #5129-53 Metric A new telescoping pole that is designed to give the robotic survey or all the features needed in a single pole. The lightweight carbon composite and aluminum construction makes the pole 30% lighter than a similar prism pole. It weighs just 2.3 lb (1.04 kg.) A stainless steel locking pin engages at selected holes in the graduated inner to guarantee no slippage or length change of the pole. Holes every 6 inches on #5129-52. Holes every 20 cm on #5129-53. Poles now come with a TLV lock which has a 40-minute circular vial built into the lock. It’s easier to lock and unlock. Dual graduations, 2 mm and .01 ft on #5129-52, 2 mm, every 2 mm on #5129-53. Collapses to 4.6 ft. (1.4 m). Extends to 8.5 ft (2.6 m). Prism can be mounted at top or bottom of pole. Lightweight aluminum point with hardened tip. Use a mini bipod #5217-05 when a stand or plumbing is required (sold separately). Weighs 3.5 lb (1.6 kg) 3.5-Meter Robotic Carbon Prism Pole #5129-72 Dual graduation #5129-73 Metric $ 475.95 YOUR CHOICE
		GPS Carbon Fiber Poles The SECO telescoping poles are designed to give the GPS surveyor all the features needed in a single pole. Ideal for kinematic surveys. Has a O H T. (zero height, generic for all users) The lightweight carbon fiber composite and aluminum construction make the poles 30% lighter than similar prism poles. Stainless steel locking pin engages in selected hole in the graduated inner to guarantee no slipping or change in length of the pole. The pole now uses SECO’s TLV lock, which contains a 40-minute vial on the lock. Dual graduations read height to top of graduated inner. 2.5-Meter #5129-50 Dual Graduations, #5129-51 Centimeter graduations Locks at 1.8 m, 2 m and 2.2 m. The #5129-50 has dual graduations, 2 mm and .01 ft. The #5129-51 is graduated in centimeters. Collapses to 1.4 m, extends to 2.5 m. $ 395.95 3.5-Meter #5129-70 Dual Graduations, #5129-71 Centimeter graduations Locks at every 20 cm mark starting at 1.8 m, extends to 3.5 m (11.5 ft). The #5129-70 has dual graduations, cm and .05 ft. The #5129-71 is graduated in centimeters. $ 474.95
<< Previous • More info>> Manufacturer Link